So I’ve just changed my coil on my pocketx for the first time and now it won’t fire up, it just flashes blue twice. It’s turned on and has enough charge. Have I done something wrong?? How can I fix this??
Thanks in advance
Short Circuit Protection: If the PockeX detects a short circuit the device will immediately cease firing and the light will flash both blue and pink two or three times.
Check that your coil is installed properly. Make sure that your coil is Genuine Aspire and not a fake or clone as they will cause problems like this! If you are sure that the problem is not your coil, send the detailed information to service@aspirecig.com They will check with aspire engineers,then give you the suggestion from Aspire engineer.
Sounds like your unit has a short somewhere. Check to make sure the chimney that is attached to the coil has been properly screwed into the unit and that it is not cross threaded!
Short Circuit Protection: If the PockeX
detects a short circuit the device will
immediately cease firing and the light will
flash both blue and pink two or three
times.
Check that your coil is installed properly. Make sure that your coil is Genuine Aspire and not a fake or clone as they will cause problems like this!
If you are sure that the problem is not your coil, send the detailed information to service@aspirecig.com
They will check with aspire engineers,then give you the suggestion from Aspire engineer.