I got mine a few days ago and it has been performing wonderfully. No leaks, gurgles, flooding, or dry/burnt hits. Running the 0.4ohm coil at about 32w and the clouds and taste are massive. I've been seeing so many people complain about theirs and it makes me wonder if they didn't prep it right before using it. (tightening the coil in very snug, switching to vape mode before firing, etc) The only issue is the spit-back and that's my fault cause I'm using 50/50 liquid.
So many people complaining about it, and not just on this site. Anybody besides me very satisfied with their Triton?
I have 2 Tritons, one as yet unused so I can't comment on that one. The only one I have used has suffered from 2 leaks - one from the top AFC because an incorrect O-ring was factory fitted and the other from a flooded coil because a different O-ring was missing in the chimney.
Since I traced and rectified these faults I have had no further leaks at all but it is a shame that Aspire QC has slipped so far that they actually sent me their top of the range device with two faults and they will not even bother to reply to my customer service requests - let alone send me the missing/incorrect O-rings.
Hey ho, what can you do, they are in China, with my money, and I am in UK with a faulty device. This is why I am trying other manufacturers offerings at the moment - I have been using Aspire kit for a very long time but I am fed up with being flipped off!
I have tried several of the free fixes suggested on this forum with no success. I refuse to try anything that will cost me anymore money as I felt like the tank was overpriced in the first place but at the time I was in a bind. So as of now this hunk of steel is sitting on my pile of bills as a reminder to me to never go back to the store from which I purchased it. They like MOST vape shops here where I live have a no return no exchange policy. I will also not be purchasing anymore Aspire products. I have ordered a Uwell Crown tank and a Sense Herakles and an Innokin Disrupter once those puppies arrive I plan to have an Aspire smash & trash with every coil, tank and mod I own. Thanks for the good times Aspire but now its time for me to say goodbye!
Most folks work with Aspire's support system and get their problems sorted out quickly. Some of Aspire's retailers do not offer the support Aspire requires of them, even to the point of refusing to exchange obviously defective items. Folks buying from them scream loud and often. Hopefully Aspire and their distributors will cut those retailers off as soon as they can. Some folks have bought clones that are indistinguishable from the genuine Triton. These folks also scream loud and often, expecting Aspire to bail them out. It's not going to happen. They have been cheated by the clone manufacturers and retailers. I'd like to see these clone manufacturers and retailers given the old Arabic justice of having their hand cut off for stealing, Losing body parts may keep them from repeating their thefts.
The two my wife and I have been using have also performed flawlessly.
Are you the thread police?
I have two constantly filled for all day vaping with them.
As a side note - its surprising/unusual to see a "post once and run" user with something positive to say @Syranic
Unless Aspire are selling clones?
A very expensive desk ornament.
1.8 ohm coil issues, woes
If I keep the tanks vertical, have not yet had a leaking/flooding issue
If I have a tank horizontal, it tends to flood.
But, but, but
with CAREFULLY primed coil, and GENTLY breaking coil in at 8.5 to 9.5 watts for 1-2ml of juice (30PG-70VG), then going to wattage for flavor approx 10.3w for one juice, 12.6w for another, NIETHER coil survives past 6ml vaping, topping tank when eliquid gets to the top chimney holes. Coil Autopsy shows burnt cotton between coil and top of coil down leg of wire in most coils, the rest have that burnt cotton in addition to burnt cotton around the coil.