bvc coil nautilus mini

My current setup is an eleaf istick and a nautilus mini. Today my display on the istick started reading my coil at 1.6, 1.5, 1.4 and 1.3 ohms. The coil is about three weeks old it is a 1.8 ohm coil. Is my coil burnt out and not readong correctly usually it reads 1.9 to 1.7 ohms. Im getting burnt hits. Im pretty sure the coil has gone bad and plan on replacing it tomorrow.
  • 2 Comments sorted by Votes Date Added
  • It could be however also
    - Check that the Coil is screwed in properly to the Mini base (and not lose or screwed in at an angle)
    - The Mini is screwed in properly to the iStick
    - Unscrew the Coild from the Mini and make sure that there isn't any Juice in the base.

    Other than that, try a New coil and see if it works, If it does then your old Coil is for the bin.
    If the same issue occurs with a new coil, then it could be that the Mini 510pin isn't making good contact with the that case try a different Battery (if you have one). Kind of a process of elimination.
© 2017 Powered by Aspire